Table of Contents
Advertisement
Navigation mode
2038
The Options menu appears.
!
Select the
Stop-over
entry.
!
Confirm your selection by pressing
the rotary control/ push button
Select the
Point of Interest (externač)
!
try.
2103
Confirm your selection by pressing
!
the rotary control/ push button
2104
The POI menu appears.
Turn the rotary control/push button
!
to select one of the following op-
tions:
In vicinity of čocation
or
In vicinity of destination
.
44
Note:
The
In vicinity of destination
be selected if route guidance is active.
!
Confirm your selection by pressing
the rotary control/ push button
•
In vicinity of čocation
.
You can select a POI in the vicinity of
the vehicle. When you make your se-
en-
lection, the unit will tell you in which
direction the POI is located and how
far away it is.
•
In vicinity of destination
You can select a POI in the vicinity of
the destination. This provides no infor-
mation on the direction and distance.
.
Described below is how to opeate it via
the
In vicinity of čocation
entry can only
2105
The categories that can be selected are
then displayed.
.
Notes:
• The categories and points of interest
shown in the illustrations are exam-
ples. The actual display is dependent
upon the storage medium containing
POIs that is used.
• If the set system language is identical
to one of the languages available on
the storage medium, the categories
are displayed in this language. If there
is no correspondence, the categories
are displayed in all available lan-
guages. This can be recognised from a
menu item.
country code in front of the category.
• You can display information on POIs
as described in "Information about
points of interest" on page 43.
Advertisement
Table of Contents
