Announcing The Time Of Arrival; Eta Setting - Becker Traffic Pro 7945 Operating Manual

Navigation mode
•
If this function is active, all traffic
announcements are made automati-
cally on receipt.
Note:
This setting must be active ( ) in order
to be able to activate the two other
settings.
•
If you activate this function ( ),
only the traffic announcements rele-
vant to the route are made.
•
Activate this function ( ) to have
only warnings announced.
X Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
56

Announcing the time of arrival

You can specify whether the calculated
time of arrival should be announced
automatically once the route has been
calculated/ recalculated or after pressing
the button.
In the Settings menu, select the
X
entry.
2088
X Press the rotary control/push button
to switch the announcement of the time
of arrival on ( ) or off ( ).

ETA setting

You can configure the calculation of the
ETA. ETA stands for Estimated Time
of Arrival.
X In the Settings menu, select the
entry.
2091
X Confirm your selection by pressing
the rotary control/push button
2092
X You may now select
or .
•
This setting indicates to the Traffic Pro
that you tend to drive rather quickly.
An earlier ETA is calculated.
.
, ,