Selecting A Waveband - Becker Cascade Operation Manual

• Reception optimisation
Accesses the selection menu for
reception optimisation. See "Recep-
tion optimisation" on page 70.
Adaptive bandwidth controč
•
You can switch bandwidth control on/
off. See "Bandwidth control" on
page 71.

Selecting a waveband

In the Radio main menu, select
!
band .
3002
Turn the rotary control/push button
!
to select one of the following options:
FM - ačphabeticaččy ,
FM - by quačity
,
Station memory
,
AM or
Short wave
Confirm your selection by pressing
!
the rotary control/push button
The selected waveband is set.
• FM - ačphabeticaččy
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in alpha-
betical order.
The waveband set is indicated by the
symbol in the status display.
Wave-
• FM - by quačity
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in order of
quality.
The waveband set is indicated by the
symbol in the status display.
.
Radio mode
• Station memory
The last station set is retained.
The station memory, which can store
up to 20 FM and AM waveband sta-
tions, is displayed.
The waveband set is indicated by the
symbol in the status display.
See "Station memory" on page 75.
• AM
The last medium wave station selected
is set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
• Short wave
The last short wave station selected is
set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
63