Eta Setting - Becker Mexico 7948 Operating Manual

2100
Press the rotary control/push button
!
to switch the display of the speed
limits on ( ) or off ( ).
If, when the speed limit display is ON,
you travel along a route with a speed
limit and this speed limit is stored in the
navigation data, the corresponding sym-
bol will appear on the display indicating
the speed limit.
2101
Note:
On routes with variable speed limits,
a symbol with the text dyn.
driver's attention to this speed limit.
For limits that are dependent on, for ex-
ample, the weather or time of day, the
speed limit with underlining (e.g.:
"80") draws the driver's attention to this
speed limit.
As temporary speed limits (e.g. due to
road works) are usually short-lived,
these have not been stored in the navi-
gation data.
Example of a speed limit:
2110
Example of a dynamic speed limit:
2111

ETA setting

You can configure the calculation of the
ETA. ETA stands for Estimated Time
draws the
of Arrival.
! In the Settings menu, select the
setting entry.
2091
! Confirm your selection by pressing
the rotary control/push button
2092
You may now select
!
Van or Set freely
Sports car
•
This setting indicates to the Mexico
that you tend to drive rather quickly.
An earlier ETA is calculated.
Navigation mode
ETA
.
Sports car , ]ar ,
.
59