Disconnecting Devices; Calling Up Bluetooth Settings - Becker Cascade Operation Manual

Settings
• Ačways
Connection to the external device is
allowed. The function described in
"Always allow connection"
Seite 121 will also be activated.
Further connection requests will be
accepted without a query.
If the connection to the external device
is established successfully, another
signal tone can be heard and the
following message appears.
7040
Press the rotary control/push button
!
.
A connection has now been established
to the external device.
126

Disconnecting devices

! Select the device to be disconnected
from the device list.
auf
Note:
A connected device is identified by the
symbol.
7031
! Press the rotary control/push button
.
7043
Yes
! Select to disconnect or
disconnect.
If Yes is selected, the Cascade will
disconnect the required device.

Calling up Bluetooth settings

! Press .
! Turn the rotary control/push button
anti-clockwise until
appears at the top right of the display.
7030
! Press the rotary control/push button
.
7031
The Bluetooth device list is displayed.
Select the Bčuetooth menu
!
No
not to
Bčuetooth
entry.