Connecting And Disconnecting Devices - Becker Cascade Operation Manual

Connecting and disconnecting
devices
Before a Bluetoothdevice is able to
communicate with the Cascade, it must
be connected to the system.
You can initiate this connection from the
Cascade or from the external device.
Note:
It is not yet clear whether connection is
possible in both directions with all
devices using Bluetooth® wireless
technology. In the event that the
connection cannot be established from
the Cascade, try initiating
connection from the external device,
and vice versa.
Connecting devices (Cascade)
! Select the device to be connected from
the device list.
Notes:
• A device that has not yet been
connected is identified by the symbol
or . A device which is already
connected is identified by the
symbol.
• If no devices have yet been stored in
the device list No BT devices
displayed. You can then start a search
for Bluetooth devices as described in
"Searching for Bluetooth devices"
auf Seite 127.
the
7036
Press the rotary control/push button
7037
! Select Yes to connect or
connect.
If Yes is selected, the Cascade will
attempt to establish a connection to the
required device.
You may be required to enter a password
will be
depending on which device you are
trying to connect.
Note:
You will find further information on
this in the instructions for the device
which you are trying to connect.
For some devices a fixed password has
been specified by the manufacturer.
Enter this password. With other devices
.
you can choose a number code with 1 -
16 digits. This code must be entered in
the Cascade and the device to be
connected.
Settings
No not to
123