Removing/Inserting The Control Panel; Removal - Becker Cascade Operation Manual

General operation
Note:
Entering an incorrect code number three
times will disable the unit for approx.
1 hour.
1008
The time remaining until another
attempt can be made to enter the code
number is displayed.
Leave the ignition switched on.
!
Switching the ignition off resets the
waiting time of one hour to zero.
Once the waiting time has elapsed, the
data entry menu for the code number
appears again.
14
Removing/Inserting the
control panel
Part of the control panel can be removed
to provide additional effective protection
against theft.
The Cascade cannot be switched on
without this removable control panel.

Removal

A
! Push the release slide for the control
panel (A) to the right.
The control panel is released.
Remove the control panel from the
!
mount.
If the Cascade is still switched on when
the control panel is removed, it is
switched to mute and disabled.
1009
If the control panel is reinserted within
45 seconds, the Cascade will automati-
cally switch itself back on.
Notes:
• Please insert the control panel into the
accompanying protective cover after
removal.
Do not touch the metal contacts on the
control panel or on the Cascade.
• If you move your vehicle once the
control panel has been removed, once
you insert the control panel, it will
take some time for the navigation
system to ascertain your position.