AT&T MERLIN Attendant System Manager's Manual page 47

Changing the Current Settings
To change any of these Call Processing options:
1. Dial the MERLIN Attendant extension number from a Touch-Tone phone,
preferably a single-line set.
NOTE:
If you are programming from a multiline Touch-Touch phone connected
to a MERLIN LEGEND system control unit, you must enter an additional
# each time a # appears in a programming command.
Wait for an answer.
2.
Dial followed immediately by your authorized caller number and #
3.
*
The two-beep confirmation tone sounds.
4. Dial
*
2901 =
2902 =
2903 =
2904 =
2916 =
2918 =
9709 =
9710 =
Dial the number
5.
Dial # .
6.
The two-beep confir mation tone sounds.
NOTE:
Commands 9709 and 9710 require an additional # to enter.
7. Continue programming or exit authorized caller mode by dialing
To disconnect, dial # .
8.
2-22 Changing Call Processing Options
followed by "Program Code"
Day Answer Delay
Alight Answer Delay
Dialing Delay
Extension Delay
Extension Digits
Extension Transfer
Lowest Extension
Highest Extension
you have entered under "Current Setting."
in Table 2-3.
shown
.
# .
*