Changing Business Hours For Early/Late Closings - AT&T MERLIN Attendant System Manager's Manual

Changing the Current Settings
Changing Business Hours for
Early/Late Closings
If you are extending your normal business hours or closing early, use this
command so that the MERLIN Attendant plays the appropriate Day or Night
announcement.
For example, if your store is having a special sale and is extending hours until
11:00 p.m. instead of closing at 9:30 p.m., use this command so that the
MERLIN Attendant continues to answer with the Day announcement until you
indicate otherwise. Likewise, if your office is closing early, use this command
at the time your office closes to turn on the Night announcement. However, to
resume your normal schedule, you must cancel this command, as shown
below:
1. Dial the MERLIN Attendant extension from a Touch-Tone phone,
preferably a single-line set.
NOTE:
If you are programming from a multiline Touch-Tone
to a MERLIN LEGEND system control unit, you must
each time a
#
2. Wait for an answer.
*
3. Dial followed immediately by your authorized caller code and
The two-beep confirmation tone sounds.
4. Dial
*
0 = resume normal schedule
1 = open
2 = closed
5. Continue programming
6. To disconnect, dial
appears in a programming command.
#
followed by the appropriate option:
5
7
or exit authorized caller mode by dialing
.
#
Changing Your Business Hours
phone connected
enter an additional
.
#
.
* #
2-7