AT&T MERLIN Attendant System Manager's Manual page 31

Changing the Current Settings
,
NOTE:
If you are programming from a multiline Touch-Tone phone connected
to a MERLIN LEGEND system control unit, you must enter an additional
each time a
#
2. Wait for an answer.
3. Dial
*
The two-beep confirmation tone sounds.
Dial
4.
*
1 =
2 =
3 =
4 =
5 =
6 =
7 =
9 =
5. Dial two digits for the opening hour (00 through 23) using 24-hour time
(00 is midnight).
6. Dial two digits for the opening minute (00 through 59).
7. Dial two digits for the closing hour (00 through 23) using 24-hour time
(00 is midnight).
8. Dial two digits for the closing minute (00 through 59).
The two-beep confirmation tone sounds.
9. Repeat steps 4 through 8 of this procedure for each additional day as
needed.
10. Continue programming or exit authorized caller mode by dialing
11. To disconnect, dial #
2-6
Changing Your Business Hours
appears in a programming command.
#
followed immediately by your authorized caller code and
followed by a code for the day of the week.
7 3
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
entire week
.
.
#
*
#.