22. Specifications
Specifications
•
SD SMPTE 259M-C and HD SMPTE 292M input data
•
2 inputs (BNC), 1 active loop-through output (BNC) of selected input
•
Automatic selection of active input with manual override
•
10 bit digital output
•
Diagnostic LED's on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
•
SDI: 270 Mbit/s transmission (SMPTE 259M-C).
•
SDI: 525/625 interlaced.
•
Coax (75 Ohm).
•
Supported HDSDI standards:
-
Progressive:
1280x720/60/1:1/ (SMPTE 296M)
o
1280x720/59.94/1:1/ (SMPTE 296M)
o
1920x1080/30/1:1/ (SMPTE 274M)
o
1920x1080/29.97/1:1/ (SMPTE 274M)
o
1920x1080/25/1:1/ (SMPTE 274M)
o
1920x1080/24/1:1/ (SMPTE 274M)
o
1920x1080/23.98/1:1/ (SMPTE 274M)
o
-
Interlaced:
1920x1035/60/2:1/ (SMPTE 260M)
o
1920x1035/59.94/2:1/ (SMPTE 260M)
o
1920x1080/60/2:1/ (SMPTE 274M)
o
1920x1080/59.94/2:1/ (SMPTE 274M)
o
1920x1080/50/2:1/ (SMPTE 274M)
o
1920/1080/50/2:1 (1250)/ (SMPTE 295M)
o
1920x1080/24/Segmented/ (SMPTE 274M)
o
1920x1080//23.98/Segmented/ (SMPTE 274M)
o
22.4 Specifications FLM DVI input
Input front view
Image 22-3
Specifications
•
DVI type: DVI-I (DVI-Integrated), but the analog signals are not supported. Single-link configuration.
•
Single link dvi for pixelclocks up to 165MHz
•
Vertical frequencies: 24 - 75 Hz
•
Horizontal frequencies: 20 - 90 kHz
•
Supported resolutions: up to UXGA (1600 x 1200) at 60 Hz.
•
Cable lengths: up to 3 meter at UXGA speed.
•
Compliance: DDC2B support according to VESA EDID Version 1.2
•
Diagnostic LED's on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
226
DVI input
Sel
Sync OK
R59770179 FLM R22+ 15/03/2010