Button Sew-On Stitch - Bernina virtuosa 153 QE Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Select stitch #2; adjust width as needed and set the length at 0mm.
• Engage the Securing function as you begin—then turn it off—engage it again as you end.
• Lower the feed dogs.
• Fold the fabric in half to 2" x 6"; press. Insert the stabilizer.
Notes: - You can sew buttons on to stay!
- A low shank can be made for dresses and blouses or a high shank
can be made for heavier fabrics such as coats and blazers.
- Use the Button Sew-On Foot #18 to sew on waistband closures,
hook-and-eye fasteners, snaps, curtain rings, and charms.
Tecnique #1
• Select stitch #2; set up as above.
• Use a glue stick to position a button in place.
• Adjust the pin on Foot #18 to the highest position for a long shank.
• Check the distance between the holes of the button by turning the hand wheel.
• Adjust the stitch width if necessary.
• Hold the thread tails as you begin to sew.
Technique #2
• Using the lowest shank setting, attach a charm, a length of ribbon, and a hook-and-eye to the same
fabric.
• Trim threads close and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

BUTTON SEW-ON STITCH

Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
1/04/02
®
®
virtuosa 153 QE/163
Heavy flannel, 6" x 6"
1 piece, 3" x 6"
90/14 Embroidery
30 weight cotton embroidery
Button Sew-On Foot #18 (optional accessory)
virtuosa 153 QE/163/44