Using Memory And Pc; Using The Usb Ports - Fluke 190 Series II User Manual

About this Chapter
This chapter provides a step-by-step introduction to the
general functions of the test tool that can be used in the
three main modes: Scope, Meter, or Recorder. You will
find information on computer communication at the end of
this chapter.

Using the USB Ports

The test tool is provided with two USB ports:
•
a USB-host port to connect an external flash memory
drive ('USB-stick') for data storage.
•
a mini-USB-B port which allows you to connect the
test tool to a PC for remote control and data transfer
under PC-control, see Using FlukeView
The ports are fully isolated from the input channels and
are covered with dust covers when not in use.
®
on page 80.

Using Memory and PC

USB stick
Mini USB
Figure 35. Test Tool USB Connections
Chapter 5
71