Table of Contents
Advertisement
NORMA 6003/NORMA 6003+/NORMA 6004/NORMA 6004+
Users Manual
Memory
The user can select the operation mode of the Analyzer when the memory is full, which can be set to
stop the logging by the system, to manually clear log files saved in the Product by the user, or to
automatically overwrite the old files by the system.
1. In the Settings screen, use the up and down arrow (K L) keys to move the cursor to the Logger
Memory option (the drop-down menu is highlighted in yellow).
2. Push S and use the up and down arrow (K L) keys to select the corresponding option. Then
push S again to confirm the option.
3. Push J repeatedly to go back to the main screen of the Settings.
Set Communication Parameters
The Analyzer supports communication via USB virtual serial port and RS-485. Host/slave
communication is realized by RS-485 communication in the dual-unit interconnection mode. For
details, see
Dual-Unit
In order to ensure normal communication, the communication port of the Product needs to be set up
correctly.
Enter the Comm. Setup Interface:
From the Main screen in any operating mode select r > 2 (Comm.).
•
The "Comm." settings screen is shown, the items that can be set for USB virtual serial port and
RS-485 port are as shown in
Item
Connect
Parity
Baud Rate
64
Interconnection.
Table
30.
Table 32. Communication Parameters
USB (virtual serial) port
RS-485
O: Odd parity
E: Even parity
N: No parity
9600
19200
38400
57600
112500
230400
460800
576000
921600
Option
Advertisement
Table of Contents
