Table of Contents
Advertisement
802CN/802-II
Users Manual
Push
to save the reading. SAVE no longer flashes on
the screen. Instead, the memory location shows on the
upper-left of the screen. Quick measurements are saved as
sequential files that start at 01. For example, P03 means the
reading is saved in the 3rd file.
A maximum of 99 measurement readings can be stored in
the memory. When the memory is full, the Product
automatically deletes the earliest reading.
View Memory
When the Product is on:
1. Push
to enter View Memory mode. The screen
shows the latest stored position.
2. Push
to switch to the last stored position.
3. Push
to switch to the next stored position.
4. Push
to switch to Measurement mode.
The last viewed storage position is automatically saved
and will be shown when you enter View Memory mode
next time.
5. Push and hold
the last stored reading.
8
for more than one second to view
Clear All Data
In View Memory mode, push and hold
5 seconds to clear all stored data.
Backlight
When the Product is on, push to turn on/off the backlight.
The backlight automatically turns off after
120 seconds of inactivity.
Flashlight
The Product has a built-in flashlight to illuminate the
measurement area on the machine. Push and hold for
2 seconds to turn on or turn off the flashlight. See
The flashlight automatically turns off after
120 seconds of inactivity.
for over
Note
Figure
Note
2.
Advertisement
Table of Contents
