Resetting The Test Tool; Suppressing Key Labels And Menu's - Fluke 190 Series II User Manual

Fluke 190 Series II
Users Manual

Resetting the Test Tool

If you want to reset the test tool to the factory settings,
without clearing the memories, do the following:
1 Turn the test tool off.
2 Press and hold.
USER
3 Press and release.
The test tool turns on, and you should hear a double beep,
indicating the reset was successful.
4 Release.
USER
88

Suppressing Key Labels and Menu's

You can close a menu or hide key label at any time:
Hide any key label, press again to display the
CLEAR
key label again (toggle function).
A displayed menu will be closed.
To display menus or key labels, press one of the yellow
menu keys, e.g. the
SCOPE
You can also close a menu using the
CLOSE.
key.
softkey
F4