Navigating a Menu
The following example shows how to use the test tool's
menus to select a function. Subsequently follow steps
1 through 4 to open the scope menu and to choose an
item.
1
Press the
SCOPE
the labels that define the present
use for the four blue function keys
at the bottom of the screen.
To hide the labels for full screen view, press the
key. Press the
CLEAR
the labels again. This toggling enables you to
check the labels without affecting your settings.
2
Open the Waveform Options
F4
menu. This menu is displayed at
the bottom of the screen. Actual
settings are shown on a yellow
background.
key to display
SCOPE
Note
key again to show
CLEAR
Using the Scope and Meter
1
3b
SCOPE
ENTER
ENTER
3a
Figure 4. Basic Navigation
Use the blue arrow keys to
3a
highlight the item. Press the blue
ENTER
ENTER
3b
The next option will be selected.
After the last option the menu will
be closed.
Pressing the blue arrow keys lets you to step
through a menu without changing the settings.
To exit the menu at any moment press
(CLOSE)
Navigating a Menu
3b
3b
ENTER
ENTER
3a
key to accept the selection.
Note
F4
1
13