Using Flukeview - Fluke 190 Series II User Manual

Fluke 190 series II
Users Manual
®

Using FlukeView

®
With the FlukeView software you can upload waveform
data and screen bitmaps to your PC or notebook computer
for further processing.
USB drivers for the test tool and a FlukeView
version with restricted functionality are available on the
CD-ROM included in the shipment.
Connecting to a Computer
To connect the test tool to a PC or notebook computer and
use the FlukeView software for Windows
the following:
Use a USB-A to mini-USB-B interface cable to
connect a computer to the mini USB PORT of the test
tool (See Figure 36).
Install the test tool USB drivers, see Appendix A.
®
Install the FlukeView
about installing and using the FlukeView
ScopeMeter software see the FlukeView
Manual on the CD ROM.
80
®
Demo
®
(SW90W), do
Demo version. For information
®
®
Users
Figure 36. Connecting a Computer
Notes
−
The optional kit SCC290 contains an
activation code to convert the FlukeView
Demo version into a fully operational version.
−
A complete FlukeView
ordered using ordering code SW90W. For
use with the Fluke Series II ScopeMeter test
®
tools FlukeView ScopeMeter release V5.0
or higher is required.
−
The test tool input channels are electrically
isolated from the USB port.
−
Remote control and data transfer via mini-
USB is not possible while saving or recalling
data to or from the USB-stick..
®
®
version can be