Fluke 190 Series II User Manual page 77

4 Select the positive pulse icon to
trigger on a positive pulse, then
ENTER
jump to Condition:
5 Select >t, then jump to Update:
ENTER
6 Select On Trigger and exit the
menu.
ENTER
The test tool is now prepared to trigger on pulses that are
more than a selectable time in duration. Observe that the
trigger menu at the bottom of the screen has been
adapted to set the pulse condition:
To set the pulse width to 110 ms, continue as follows:
7 Enable the arrow keys to adjust
F1
the pulse width.
8 Select 110 ms.
Triggering on Waveforms
Triggering on Pulses
Figure 34. Triggering on Missing Pulses
4
69