−
For mVs select probe type 'Voltage'.
−
For mAs select probe type 'Current'.
−
For mWs select mathematical function x,
and probe type 'Voltage' for one channel
and 'Current' for the other channel.
Using Cursors on a Mathematical Result (+ - x)
Waveform
Cursor measurements on, for examle, a AxB waveform
give a reading in Watts if input A measures (milli)Volts and
input B measures (milli)Amperes.
For other cursor measurements on, for example, a A+B,
A-B or AxB waveform no reading will be available if the
input A and input B measurement unit are different.
Notes
Using Replay, Zoom and Cursors
Making Cursor Measurements
Using Cursors on Spectrum Measurements
To do a cursor measurent on a spectrum, do the following:
1
From Spectrum measurement
CURSOR
display the cursor key label.
Move the cursor and observe the
2
readings at the top of the screen.
3
55