Fluke 190 Series II User Manual page 51

Note
When simultaneously TrendPlotting two readings,
the screen area is split into two sections of four
divisions each. When simultaneously
TrendPlotting three or four readings, the screen
area is split into three or four sections of two
divisions each.
Figure 20. TrendPlot Reading
Using The Recorder Functions
Plotting Measurements Over Time (TrendPlot™)
When the test tool is in automatic mode, automatic vertical
scaling is used to fit the TrendPlot graph on the screen.
5 Set
F1
the recorder function.
6 Set
F1
Scope TrendPlot is not possible on cursor related
measurements. As an alternative you may use
FlukeView logging of readings.
to to freeze
RECORDER STOP
to to restart.
RECORDER RUN
Note
2
43