Fluke 190 Series II User Manual page 52

Fluke 190 Series II
Users Manual
Displaying Recorded Data
When in normal view (
NORMAL
recently recorded divisions are displayed on screen. All
previous recordings are stored in memory.
shows all data in memory:
VIEW ALL
7 Display an overview of the full
F3
waveform.
Press repeatedly to toggle between normal view
F3
( ) and overview (
NORMAL VIEW ALL
When the recorder memory is full, an automatic
compression algorithm is used to compress all samples
into half of the memory without loss of transients. The
other half of the recorder memory is free again to continue
recording.
44
), only the twelve most
)
Changing the Recorder Options
At the lower right of the display, the status line indicates a
time. You can choose this time to represent either the
start time of the recording ('Time of Day') or the time
elapsed since the start of the recording ('From Start').
To change the time reference, proceed from step 6 as
follows:
7 Open the
F2
menu.
8 Select Time of Day or From
Start
ENTER
Turning Off the TrendPlot Display
9 Exit the recorder function.
F4
RECORDER OPTIONS