Fluke 190 Series II User Manual page 44

Fluke 190 Series II
Users Manual
Measuring Resistance Values
To measure a resistance, do the following:
1 Connect the red and black test leads from the
4-mm banana jack inputs to the resistor.
2 Display the
METER
3 Open the
F1
4 Highlight Ohms.
5 Select Ohms measurement.
ENTER
36
key labels.
METER
menu.
MEASUREMENT
The resistor value is displayed in ohms. Observe also that
the bargraph is displayed. (See Figure 15.)
Figure 15. Resistor Value Readings