Fluke 190 Series II User Manual page 45

Making a Current Measurement
You can measure current in both Scope mode and Meter
mode. Scope mode has the advantage of waveforms
being displayed while you perform measurements.
Meter mode has the advantage of high measurement
resolution.
The next example explains a typical current measurement
in Meter mode.
Warning
Carefully read the instructions about the
current probe you are using.
To set up the test tool, do the following:
1 Connect a current probe (e.g. Fluke i410,
optional) from the 4-mm banana jack outputs to
the conductor to be measured.
Ensure that the red and black probe connectors
correspond to the red and black banana jack
inputs. (See Figure 16.)
2 Display the
METER
key labels.
METER
Making Multimeter Measurements (for models 190-xx2)
Figure 16. Measurement Setup
3 Open the
F1
Highlight A ac.
4
Open the
5
ENTER
submenu.
Using the Scope and Meter
menu.
MEASUREMENT
CURRENT PROBE
1
37