Adjusting The Probe Type Settings - Fluke 190 Series II User Manual

Fluke 190 Series II
Users Manual
Figure 6. Scope Connections
16

Adjusting the Probe Type Settings

To obtain correct measurement results the test tool probe
type settings must correspond to the connected probe
types. To select the input A probe setting do the following:
1 Display the
A
2 Open the
F3
3 Select the probe type Voltage,
Current, or Temp
ENTER
4 Voltage: select the voltage probe
attenuation factor
ENTER
Current and Temp: select the
current probe or temperature
probe sensitivity
key labels.
INPUT A
menu.
PROBE ON A