Maintaining The Test Tool; Cleaning The Test Tool; Storing The Test Tool - Fluke 190 Series II User Manual

About this Chapter
This chapter covers basic maintenance procedures that
can be performed by the user. For complete service,
disassembly, repair, and calibration information, see the
Service Manual. (www.fluke.com)
Warning
•
Have an approved technician repair the
product.
•
Use only specified replacement parts.
•
Before carrying out any maintenance,
carefully read the safety information at
the beginning of this manual.

Maintaining the Test Tool

Cleaning the Test Tool

Warning
Remove the input signals before you clean
the test tool.
Clean the test tool with a damp cloth and a mild soap. Do
not use abrasives, solvents, or alcohol. These may
damage the text on the test tool.

Storing the Test Tool

If you are storing the test tool for an extended period of
time, charge the Li-ion (Lithium-ion) batteries before
storing.
Chapter 7
95