Fluke 190 Series II User Manual page 150

Fluke 190 Series II
Users Manual
4 After completing the first step the New Hardware Wizard will
start again to install the USB Serial Port Driver.
Click 'Next' to install the software automatically.
Windows will download the drivers automatically from the
Windows Driver Distribution Center on the internet. If there is
no connection to the internet, you need to load the CD-ROM,
supplied with the ScopeMeter, which contains the drivers.
5 Follow the instructions on screen.
When the driver finished installation click 'Finish' to complete
the final step of the driver installation.
You are now ready to use the ScopeMeter with FlukeView
Software SW90W from version V5.0 onwards.
A-4