Data and Internet Integration
Setting Up LAN and Internet Email on the Client
To set up the client side of the LAN:
1. Configure the following client TCP/IP Properties (see Figure 64 on
page 162):
— IP Address
— Subnet Mask
— Default Gateway
2. On the DNS tab of TCP/IP Properties, enter the following (see Figure
65 on page 163):
— Host Name
— Domain
— DNS Service Search Order
3. Configure the following mail server parameters of the email client
application:
— Enter the Mail Server (POP3) User Name. (This is the same name
entered as the email name on the AltiServ General page of
Extension Configuration).
— Enter the Incoming Mail (POP3) Server address.
— Enter the Outgoing Mail (SMTP) Server address.
166 AltiWare OE System Administration Manual