Table of Contents
Advertisement
Trunk Configuration
Caller ID and DID Incoming Sequence Example
The following is an example of a Caller ID and DID/DNIS incoming
sequence window.
Figure 30. Incoming Sequence example
When a call comes in, the system tries to match the incoming sequence to
either the first or second Incoming Sequence Digit String sequence. If no
match is found, no Caller ID or DID digits will be collected.
•
The system waits 3 seconds for the first digit to arrive. If the symbol is
a , it continues with the first sequence. Otherwise, it looks for a match
to the first (and only) symbol in the second sequence, the
number.
•
For the example, let's say the system receives the . It then waits 1
second between each digit for the next digit until all digits are received.
The symbol is a delimiter between Caller ID and DID digits.
This example the system AltiServ is expecting either the sequence
or only
& , ' ' , '
either sequence, no Caller ID or DID digits are collected.
80 AltiWare OE System Administration Manual
digits for incoming calls. If no match is found for
' , '
' , ' ' 1 , 6
Advertisement
Table of Contents
