Hapter; Configuring Your Station Settings; Apply Button And Ok Button - Altigen AltiView Release 4.0 User Manual

Configuring Your Station Settings

You can configure the following settings and options by clicking the
Config button in the main window to open the Config window.
• General Info—password, default trunk access, and other settings.
• One Number Access (ONA)—forwarding of specific incoming calls.
This is available only when your extension configuration is set up to
allow ONA.
• Call Handling—forwarding, busy call, and no-answer call handling.
• Message Notify—how and when to notify yourself about incoming
voice messages.
• Station Speed—your personal speed dial numbers
• System Speed—you can view and edit the name and comments, but
the not the number itself, of system speed dial numbers.
Options are disabled if they are not available. For example,
One Number Access must be enabled in the AltiWare
Administrator. Further, if you don't enable ONA as a Call
Handling option, you can't set up and use ONA.

Apply Button and OK Button

In the Configuration windows, you'll see two buttons that save your
changes: the Apply button and the OK button.
• The Apply button saves your changes and lets you continue in the
current window.
• The OK button saves your changes and closes the current window.
C
H A P T E R
AltiView 4.0 User Guide
4
35