Table of Contents
Advertisement
Configuring Your Station Settings
Call Handling
Click the Call Handling tab in the Config window to configure incoming
call handling for your extension.
Figure 16. Call Handling configuration
Forwarding All Calls
If you want to forward calls to an external number, select a trunk access
code in the drop-down list, then begin with the outside trunk or route access
digit and any long distance prefix digits such as 1 and area code.
If you want to use One Number Access, see page 40.
There is a "1-hop" limit to call forwarding. For example, ext. 101 forwards
to ext. 102, and Ext. 102 forwards to ext. 103. A call to ext. 101 will ring
ext.102 but will not re-forward to ext. 103 because of the 1-hop limit.
Instead, if ext.102 does not answer, the call is sent to ext.101's voice mail.
38 AltiView 4.0 User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the AltiView Release 4.0 and is the answer not in the manual?
Questions and answers