Altigen AltiView Release 4.0 User Manual page 30

Handling Calls
You can cancel the conference at any time by clicking the Cancel
button, closing the dialog box, or by pressing your phone's FLASH
button. Normally, after cancelling you will be reconnected
automatically to the initial call. If you are not automatically
reconnected and want to reconnect to the first call, click the Hold
Pending status representing the call.
3. After the third party connects, you can announce the conference by
clicking OK in the dialog box. If the third party does not answer, click
the Cancel button.
Figure 9. Conference Calls Displayed in Call List
4. Click the Conference button again to initiate the three-way
conference. Both calls will be displayed as Conference state.
To add another party, click the Conference button and repeat steps 2-4.
22 AltiView 4.0 User Guide