Altigen AltiView Release 4.0 User Manual page 50

Configuring Your Station Settings
Using this dialog box, you can set up to four different schedules. You
can enable or disable each schedule by selecting or deselecting its
check box.
• Enable the Verify Caller ID check box and then specify the incoming
phone numbers for ONA. If ONA finds one of these numbers on an
incoming call, it will send the call on to you.
Caution: If no numbers are entered in the Caller ID verification
fields and ONA is enabled, it is made available to every caller.
You can enter up to ten phone numbers in the Caller ID verification
fields. For local numbers, use 7 digits. For long distance numbers, use
10 digits—area code + local number.
Using a Password
You can also enter a password number such as "5555" so that a caller
who knows this password can use ONA to find you, regardless of
where they are calling from. Tell the caller the caller to dial 1 during
your personal greeting and then enter the password.
• Select the Forwarding Numbers to be used by the system to find you
when ONA is active. You can set up to four different numbers—
extensions or outside numbers. For outside numbers, use the drop-
down list to select the trunk access code you want to use.
When ONA is active, the system dials the forwarding
number(s) in the order from Forwarding Number 1 through
Forwarding Number 4. (This number order does not
correspond to the Schedule order—Forward Number 2 is not used first
during Schedule Number 2.
42 AltiView 4.0 User Guide