Table of Contents
Advertisement
Installation
Installation and Setup
Pre-Installation Checklist
Before installation AltiView, please review the following checklist:
•
Make sure that AltiWare OE 4.0 has been installed on the AltiServ
system.
•
Make sure that AltiView VM Service has been installed on the
AltiServ system, as discussed in a subsequent subsection.
•
Make sure that TCP/IP is enabled on both machines.
•
Make sure the client is able to connect to the server on the network.
Installing AltiView on a Client System
After completing the pre-installation checklist, proceed as follows on the
client machine:
1.
Exit any/all Windows applications.
2.
Insert the AltiWare CD into the CD ROM drive.
3.
Run the Setup program under AltiView\AltiView Client and follow
the step by step installation instructions as they appear on the screen.
Installing AltiView Voice Mail Service on AltiServ
AltiGen Switching Service must be installed first. AltiGen Switching
Service is installed and run when you install AltiWare and anytime you run
the AltiWare Administrator.
1.
On the client system, locate AltiServ on the network.
2.
Run SETUP.EXE under AltiView\AltiView VM Service directory
and follow the prompts.
3.
Access Services from the Control Panel on the NT or from Programs
Administrative Tools
2000.
4.
Highlight AltiView Voice Mail Service and click Start.
4 AltiView 4.0 User Guide
Component Services on Windows
Advertisement
Table of Contents
Need help?
Do you have a question about the AltiView Release 4.0 and is the answer not in the manual?
Questions and answers