Color Registration Sensor Assembly; Removing The Color Registration Sensor Assembly - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Color registration sensor assembly

Warning Switch off the power and disconnect the power cord.
1. Open the top cover. Remove the drum/toner cartridges. Place them in
a lightproof black bag to protect the drum units from light and store in a
safe place.
2. Remove the transfer belt unit as detailed on page 124.
3.
Remove the shutter plate as described in the previous procedure
"Shutter plate" on page 144.
4. Remove the two screws securing the color registration sensor assembly.
5.
As you lift the assembly, carefully disconnect the two harnesses (RSNS
and LSNS) connected to the assembly.
6. Remove the color registration sensor assembly.

Removing the color registration sensor assembly

Reverse these steps to install the color registration sensor assembly.
Remove
Screws
Color Registration
Sensor Assembly
Service Guide 145