Exit Roller - Xerox Phaser 3450 Service Manual

Disassembly and Reassembly

5.18 Exit Roller

1. Before you remove the Exit Roller, you should
remove:
- Top Cover (Refer to the 5.13)
2. Take the Actuator out.
Actuator
3. Remove the Exit Roller and Bearing as shown
below.
Service Manual
5-18
Bearing
Exit Roller
4 Take out the Exit Gear as shown below.
5. Take out the Duplex Exit Roller as same
method.
Bearing
Exit Gear
Duplex
Exit Roller