Table of Contents
Advertisement
Configuring the SCSI/SCSI RAID HBA
This section briefly shows how to create a RAID 1 (mirror) volume. This
feature requires installation/presence of LSI Logic 20320-R or LSI Logic
22320-R U32 SCSI controllers.
How to use SCSI HBA setup utility
During the Power-On Self Test (POST), press <Ctrl > + <C> to enter the
LSI Logic Configuration Utility.
Loading HBA Default Settings
1
In the LSI Logic MPT SCSI Setup Utility, please press F2 and select
Global Properties. Then, select <Restore Defaults>.
2
Press ESC, then select <Save changes then exit this menu>.
3
Move cursor to <53C1020/1030> and press Enter
4
Move cursor to <Restore Defaults> and press Enter.
5
Press ESC, then select <Save changes then exit this menu>.
How to use SCSI RAID HBA setup utility
How To Create RAID 1 (Mirror) volume with a Hot Spare
Disk
1
In the LSI Logic MPT SCSI Setup Utility, please select <53C1020/
1030> and press Enter.
2
Move cursor to <RAID Properties> and press Enter.
3
In Array Disk field, press Space key to change the hard disk to
[Yes].
Note: In the Array Disk field, if you change settings, you will see
the following messages. Press the DELETE key to erase data.
F3 - keep Data (Create 2 disk array)
Delete - Erase Disk (Create 2 to 6 disk array)
4
In Hot Spare field, press Space key to change the hard disk to [Yes].
59
Advertisement
Table of Contents
