Configuring The System Os - Acer Altos R520 M2 Series User Manual

Configuring the system OS

The Acer Altos R520 M2 comes with Acer EasyBUILD
to conveniently install your choice of operating system.
Note: To purchase the Acer EasyBUILD software, contact your
local Acer representative.
To start using EasyBUILD, follow the steps below.
1 Locate the EasyBUILD DVD included in the system package.
2 With the system turned on, gently press the optical drive's Stop/
Eject button.
3 When the disc tray slides open, insert the EasyBUILD DVD with the
label or title side of the disc facing upward.
Note: When handling the disc, hold it by the edges to avoid
smudges or fingerprints.
4 Gently press the disc down to make sure that it is properly
inserted.
Caution! While pressing the disc, be careful not to bend the disc
tray. Make sure that the disc is properly inserted before closing
the disc tray. Improper insertion may damage both the disc and
the CD-ROM drive.
5 Gently press the drive Stop/Eject button again to close the disc
tray.
6 On the Acer EasyBUILD System Setup window, select OS
Installation.
7 Follow all onscreen instructions.
For more information, refer to the EasyBUILD Help file.
Note: Windows or Linux OS CD is needed when you install the OS
with the EasyBUILD DVD.
31
TM that allows you