5-4. Belt tension adjustment
5-5. Assembling the cotton stand
4. If the machine is being used with the puller attached, install
the puller belt cover (8) with the two screws (9).
1476B
1. Place the V-belt (3) onto the machine pulley (1) and the
motor pulley (2).
2. Turn the nuts (4) to adjust so that there is 20 – 30 mm of
deflection in the V-belt (3) when it is pressed at the midway
point with a force of 9.8 N.
1477B
1. Assemble the cotton stand while referring to the instruction
manual for the cotton stand.
2. Install the cotton stand to the table with the nut (1).
1478B
DA-9280
5. INSTALLATION
8