Table of Contents
Advertisement
Chapter 5 Setting
Details of mending can be set in case of a thread breakage.
1.
2.
3.
4.
5.
Length of thread to leave on the needle bar after thread trimming can be set for
each needle bar.
1.
88
Setting of Mending
Contents of each setting item are as described below.
Item
Contents
For setting whether to reset a thread breakage error automatically
This function is previously set to
Press
.
Select
by pressing
Press
.
Press
for modifying a resetting method.
Press
.
E N D
Modified setting is saved and the initial screen is displayed again.
Thread Trimming Length
This setting is explained on the basis of the BES-916AC screen.
Thread trimming length can be set within the range of 1 ~ 6.
This function is previously set to 4 upon shipments.
Press
.
BES-916AC • BES-1216AC
For resetting an error automatically
For resetting an error manually
.
(Manual) upon shipments.
Advertisement
Table of Contents
