Chapter 6 Embroidering
Set the basic position of the hoop (hoop feed position) for cancellation of
embroidering.
1.
2.
3.
Sets the embroidery area.
1.
2.
152
Hoop Feed Position
The hoop feed position can be set only in the embroidering area surrounded by a
red frame.
Select [Hoop Feed Position] from Settings menu.
Click the point to feed the hoop.
The gray cross appears and shows the hoop feed position.
Embroidery Area
Select [Embroidery Area] from Settings menu.
Drag the embroidery area using the mouse for designation.
The embroidery area is displayed in light blue.
BES-962BC • BES-1262BC
Hood feed position