Insert Or Delete Code - Brother BES-1240BC Instruction Manual

Chapter 5 Editing Embroidery Data
Codes of trim, pause and color change can be inserted or deleted by moving the
needle to the desired position.
1.
Next (previous) color change point
2.
3.
4.
5. To end code insertion or deletion, click
114

Insert or Delete Code

Select [Insert or delete code] from the Edit menu.
Needle movement tool bar is displayed.
1 step
10 step
100 step
Next (previous) feed point
Next (previous) trim code
Next (previous) pause code
Select the movement method of needle position.
Click either of the following buttons:
1 step
10 step
100 step
Next (previous) color change point
Next (previous) feed point
Next (previous) trim code
Next (previous) pause code
Move the needle position to the desired position.
Click either of the following buttons:
Consecutive step backward specified
Step backward specified
Stop
Step forward specified
Consecutive step forward specified
Insert or delete the code.
Click either of the following buttons:
Insert (delete) trim code
Insert (delete) pause code
Insert (delete) change color code
BES-940BC • BES-1240BC
Step forward specified
Stop
Step backward specified
Consecutive step backward specified
Moves the needle position by 1 step each.
Moves the needle position by 10 step each.
Moves the needle position by 100 step each.
Moves the needle position to the next (previous) color change point.
Moves the needle position to the next (previous) feed point.
Moves the needle position to the next (previous) trim code.
Moves the needle position to the next (previous) pause code.
The needle position returns consecutively until the "Stop" button is pressed.
The needle position returns for the specified length.
The needle position stops movement.
The needle position moves forward for the specified length.
The needle position moves forward consecutively until the "Stop" button is pressed.
Insert (or delete) the trim code at the current needle position.
Insert (or delete) the pause code at the current needle position.
Insert (or delete) the change color code at the current needle position.
.
Insert (delete) change
color code
Insert (delete) pause code
Insert (delete) trim code
Consecutive step forward specified