Panel Functions At Power On - Epson Stylus Color 1520 Service Manual

1.4.2 Panel Functions at Power On

This printer enters various functions by turning on the printer while holding down a button
(or buttons). Each combination and corresponding function is described in the table below.
Button Pressed *
(while turning on the printer)
Micro Adjust ↓
Pause
Load /Eject
LF/FF
LF/FF + Load/Eject
Alt + LF/FF + Load/Eject
+ Micro Adjust ↑
1
Note) * "+" means to press one button while holding down the other button(s).
2
* EEPROM and Timer IC must be reset only by qualified service personnel.
When EEPROM is reset, waste ink drain pads must be replaced. Therefore, EEPROM should only be
reset by a qualified service person. (See Chapter 3.)
Table 1-23. Panel Functions at Powered On
1
Enters default setting mode. (See Section 1.4.4.)
Enters printer adjustment mode. (See Section 1.4.5.)
Starts LQ self-test printing.
Starts draft self-test printing.
Enters hex-dump mode.
Enters EEPROM and Timer IC reset *
CAUTION
Product Description
Function
2
mode.
1-25