Config Firmware Image - D-Link 3100 24P - DGS Switch - Stackable User Manual

Field
Version
Update Time

Config Firmware Image

The Config Firmware Image Page allows users to change each device's image file. To change the reboot file:
1. Click C onfiguration > Dual Image Services > Config Firmware Image. The Config Firmware Image Page
opens:
T he Con fig Firmware Imag
Field
Unit
Image
2. Select the Unit
3. Click
Description
An "*" indicates that this image file is used for reboot.
Displays the image file's version number.
Displays the time and date which the software was saved to the server.
Figure 2-21 Config Firmware Image Page
e Page contain s the following fields:
Description
Defines the stacking member for which the reboot image file is defined.
Defi nes the image file used for reboot. The possible values

1 – Image-1 is the latest downloaded image file.

2 – Image-2 is the pre
and choose its reboot Image file.
. The device will use the defined image file to reboot next time.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
viously downloaded image file.
are:
58