Defining Snmp Users - D-Link 3100 24P - DGS Switch - Stackable User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Defining SNMP Users

The SNMP User Table Page enables assigning system users to SNMP groups and defining the user authentication method.
To assign system users:
1. Click Configuration > SNMP Settings >SNMP User Table. The SNMP User Table Page opens:
The SNMP User Table Page contains the following fields:
Field
User Name
Group Name
SNMP V3 Encryption
Auth-Protocol by Password
Password
Confirm Password
49
Figure 2-14 SNMP User Table Page
Description
Defines the SNMP user name included in the SNMP user group.
Defines the SNMP group and assigned to a user.
Defines the SNMPv3 user authentication method. The possible field values are:
None —No user authentication is used.
Password — Provides user authentication via the HMAC-SHA-96 authentication
level password or HMAC-MD5-96 password.
Key — Provides user authentication via the HMAC-MD5 algorithm or the HMAC-
SHA-96 authentication level.
Selects the authentication password type used to authenticate users. The possible field
values are:
MD5 — Defines that HMAC-MD5-96 password is used for authentication.
SHA — Defines that HMAC-SHA-96 authentication level password is used for
authentication.
Defines the password used for authentication. (1-32 digits).
Confirms the password used for authentication. (1-32 digits).