Defining Eap Forwarding Settings - D-Link 3100 24P - DGS Switch - Stackable User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Defining EAP Forwarding Settings

Ports use the Extensible Authentication Protocol (EAP) forwarding mechanism when 802.1x authentication is disabled. The
Forwarding EAP Page allows the user to enable or disable forwarding EAP packets to an authentication server.
1. Click Security > 802.1X > Forwarding EAP. The Forwarding EAP Page opens:
The Forwarding EAP Page contains the following field:
Field
Forwarding EAP
2. Define the EAP packet forwarding status in the Forwarding EAP field.
3. Click
135
Figure 5-1. Forwarding EAP Page
Description
Specifies whether forwarding of EAP packets is enabled on the device. The possible field
values are:
Enabled — Enables forwarding of EAP packets.
Disabled — Disables forwarding of EAP packets. This is the default.
. The EAP packet forwarding status is defined, and the device is updated