Config Firmware Image - D-Link DGS-3100 SERIES User Manual

Field
Unit
Image
Version
Update Time
Set Boot
Delete

Config Firmware Image

The Config Firmware Image Page allows users to change each device's image file. To change the reboot file:
1. Click Configuration > Dual Image Services > Config Firmware Image. The Config Firmware Image Page
opens:
The Config Firmware Image Page contains the following fields:
Field
Unit
Image
2. Select the Unit and choose its reboot Image file.
3. Click
Description
Displays the stacking member for which the firmware image information is displayed.
Each device has two image files, one for reboot and one for backup. Upon software
upgrade download, the downloaded image file is designated for reboot, although users
can modify this in the Config Firmware Image page.
An "*" indicates that this image file is used for reboot.
Displays the image file's version number.
Displays the time and date which the software was saved to the server.
Selects the image to be become the active image at the next bootup.
Deletes the selected image. The image is deleted immediately.
Figure 0-24 Config Firmware Image Page
Description
Defines the stacking member for which the reboot image file is defined.
Defines the image file used for reboot. The possible values are:

1 – Image-1 is the latest downloaded image file.

2 – Image-2 is the previously downloaded image file.
. The device will use the defined image file to reboot next time.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
64