Defining Snmp Groups - D-Link 3100 24P - DGS Switch - Stackable User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Defining SNMP Groups

The SNMP Group Table Page provides information for creating SNMP groups and assigning SNMP access control
privileges to SNMP groups. Groups enable network managers to assign access rights to specific device features or feature
aspects. To define SNMP groups:
1. Click Configuration > SNMP Settings > SNMP Group Table. The SNMP Group Table Page opens:
The SNMP Group Table Page contains the following fields:
Field
Group Name
Read View Name
Write View Name
47
Figure 2-13 SNMP Group Table Page
Description
Defines the user-defined group name to which access control rules are applied (limited to 30
alphanumeric characters).
Defines a Read Only view. The Read Only view management access is restricted to read-only,
and changes cannot be made to the assigned SNMP view. The possible values are:
Community/View
TestReadView
PWriteView
PrivateView
Defines a Write view. The Management view access is read/write, and changes can be made to
the assigned SNMP view. The possible values are:
Community/View
TestReadView
PWriteView
PrivateView