Table of Contents
Advertisement
2. Click
3. Click
To view or modify Time Range settings:
4. Click
5. Define the Time Range Edit fields.
6. Click
Notes about 'IP' and 'MAC' Based ACLs in the DGS-3100 Series
ACLs can be configured in DGS-3100 series via the WEB GUI in two ways: through the 'ACL Configuration Wizard'
screen (by automatic creation of profile and rule) and through the 'ACL Profile List' page by manual creation of profiles
and rules.
By using the 'ACL Configuration Wizard' page the user can create simple ACLs in a simple way, after setting a rule via this
page, the system will create an 'Access Profile' and also an 'Access Rule' and will bind it to a port/LAG or a group of
ports/LAG. Each operation via the Wizard can create either MAC based ACL or IP based ACL, the user can't combine both
types of ACLs in the same operation.
NOTE: Access Profile can be a MAC Access Profile or an IP Access Profile, when using the ACL
Conriguration Wizard, 'IP' or 'MAC' should be selected in the 'From' and 'To' dropdowns. When
using the 'Access Profile List' page, after clicking: 'Add Access Profile', the user can choose
wether to create 'L2 ACL' (MAC) or 'L3 ACL' (IP).
The user can set IP based ACL and MAC Based ACL on the same port(s) is the following: way:
–
Go to 'Add Access Profile' page.
–
Add L2 Access Profile with the desired fields.
. A confirmation window is displayed .
. The entry is deleted.
. The Time Range Edit Page opens:
Figure 8-25 Time Range Edit Page
. The time range is modified, and the device is updated
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
194
Advertisement
Table of Contents
