Config Firmware Image - D-Link xStack DGS-3400 Series User Manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

Config Firmware Image

The following window is used to configure firmware set in the Switch. The Switch allows two firmware images to be stored in its
memory and either can be configured to be the boot up firmware for the Switch. The user may select a boot up firmware image for
the Switch in the switch stack by using the Image pull-down window to select it, change the Action to Boot and click Apply. To
delete a firmware image, select it using the Image pull-down menu, change the Action field to Delete and click Apply.
Figure 6- 30. Config Firmware Image window
64